Si deseas descargar o visualizar la información
que disponemos a continuación, puedes realizar
la descarga en formato PDF Pulsando Aquí




  FILTROS | Accesorios para sensores de humedad

Para proteger los elementos del sensor de la contaminación, los transmisores están equipados con tapas de filtro. La elección correcta de los filtros depende de la aplicación y es muy importante para mantener el libre funcionamiento.

MODELO ASSEMBLY FEATURES TYP. APLICATIONS ORDER CODE

membrane filter
material: PC
special PTFE foil lamniated
on plastic carrier
size of pores: 1 μm
length: 34 mm (1.34“)
average filter effect
temperatures up to max. 80°C (176°F)
t10/90:15s
building automation HA010101

stainless steel sintered filter
material: sintered stainless
steel
size of pors: 10 μm
length: 33mm (1.30“)
for hard mechanical stress
and strong pollutions
Temperaturen bis 180°C
unsuitable for high
humidity measurment
t10/90: 30 s
drying process HA010103
HA010103EX for
EE30EX series

PTFE filter
Material: sintered PTFE
size of pores: 50 μm
length: 33mm (1.30“)
high chemical resistance
temperatures up to 180°C (356°F)
t10/90: 14 s
drying processes in chemical
applications
HA010105

metal grid filter
material: PC with
stainless steel wire mesh
size of pores: 30 μm
length: 34mm (1.34“)
for small mechanical stress
temperatures up to 120°C (248°F)
average pollution
suitable for high humidity
applications
t10/90: 15 s
dryind processes
danger of saturation or
applications with RH > 90 %
HA010106

metal grid filter
material: stainless steel
with stainless steel wire
size of pores: 30 μm
length: 39mm (1.54“)
for hard mechanical stress
temperatures up to 180°C (356°F)
average pollution
suitable for high humidty
measurement
t10/90: 7 s
drying processes HA010109

H2O2 filter
material:
sintered PTFE
size of pores: 50 μm
length 33mm(1.30“);
Ø12mm (0.47“)
catalytic filter for
H2O2 environments
t10/90: 14 s
sterilization with H2O2 HA010115

PTFE-acero-filtro.png
base body: stainless steel
PTFE Filter hydrophobic
length 39mm (1.54“);
Ø12mm (0.47“)
very good filter effect against
environmental influences
(e.g. dust, pollutant, salt)
very small pore size,
pressure of water intake ≥0,5 bar
fast recovery after condensation
interchangeable PTFE membrane
temperature range: -40...150°C
(-40...302°F)
t10/90:12s
meterology
high humidity applications
with
condensation
HA010114:
complete filter
HA010114ME:
replacement membrane





BRIDAS de montaje | Accesorios para sensores de humedad

Montaje de diferentes bridas para que la instalación de las sondas del sensor sea sencilla.

MODELO SUITABLE FOR DIMENSIONS (mm) ORDER CODE

plastic mounting flange
12mm (0.47“)
HVAC transmitters
max. temperature: 60°C (140°F)
  HA010202

stainless steel mounting flange
12mm (0.47")
EE23, EE31, EE33   HA010201

stainless steel mounting flange
5mm (0.2”)
EE23 - model H
EE31 - model H
  HA010208

stainless steel mounting flange
8mm (0.3")
EE75
EE33-MFTJ (temperature probe)
  HA010207

duct mounting kit
for EE22/EE07
EE07   HA010209

wall mounting clip
Ø12mm (0.47")
for all probes with Ø12mm (0.47“)
-35...105°C (-31...221°F)
  HA010211





DISPLAYS / PANTALLAS | Accesorios para sensores de humedad

Para el control de diferentes tipos de lecturas ajustables en pantalla.

MODELO SUITABLE FOR ORDER CODE

LC display + cover
EE30EX D01

LC display + cover
EE22 metal
polycarbonate
EE23 metal
polycarbonate
EE31, EE35, EE36 metal
polycarbonate
EE33 metal
D07M
D07P
D03M
D03P
D05M
D05P
D05M





ALIMENTACIÓN | Accesorios para sensores de humedad

MODELO DESCRIPTION SUITABLE FOR ORDER CODE

power supply unit
external plug power supply
input: 100-240V AC
50-60Hz /180mA
output: 18V DC / 330mA
HVAC and industrial transmitters V02





REPOSICIONES / REPUESTOS | Accesorios para sensores de humedad

MODELO DESCRIPTION SUITABLE FOR ORDER CODE

replacement sensors
replacement humidity sensor
without sensor data
replacement temperature sensor
EE23, EE31, EE30EX FE09
FE09-HC01 (with Coating)
TE38





PROTECCIÓN RADIACIÓN SOLAR | Accesorios de sensores de humedad

Para aplicaciones en el exterior los transmisores deben estar equipados con un escudo protector de radiación solar. Esto provoca una ventilación forzada que en gran medida evita el sobrecalentamiento de la sonda de detección en el sol y por lo tanto una distorsión de los valores medidos. Todos los escudos de radiación son aptos para el montaje en pared y montaje en poste.

MODELO SUITABLE FOR DIMENSION / MOUNTING ORDER CODE

radiation shield for EE21
EE21-xA2x   HA010501

radiation shield with
clamping ring Ø 12mm
EE23/31 with
remote sensing probe
EE06
EE07
EE33-J (T-Sensor)
  HA010502

radiation shield with thread
EE08
EE33-J (T-Sensor)
  HA010506





PROTECCIÓN de AGUA, LÍQUIDOS ... | Accesorios de sensores de humedad

MODELO DESCRIPTION SUITABLE FOR ORDER CODE

dripping water protection
Ø 85 mm (3.35“) all sensor probes Ø12mm (0.47“) HA010503





SOPORTE O ENCAJE | Accesorios para sensores de humedad

Para una rápida y sencilla instalación o desinstalación

MODELO SUITABLE FOR DIMENSIONS ORDER CODE

snap in - mounting flange
for wall and duct mounting
EE14, EE16
EE21
EE65, EE66
  for wall mounting:
HA010204
for duct mounting:
HA010205

bracket for installation onto
mounnting flange1
EE22, EE23, EE31, EE35, EE36   HA010203





CONEXIONES de TORNILLO | Accesorios para sensores de humedad

MODELO SUITABLE FOR DESCRIPTION ORDER CODE

dapter M16x1,5 to ½“NPT
general Adapter von M16x1,5 auf ½“NPT
(US conduit fitting)
HA011101

pressure tight screw connection
EE33-MFTKx,
EE33-MFTJx
for pressure tight probe assembly
up to 20bar (300psi)
HA011102: ½“ISO Ø12mm (0.47“)
HA011103: ½“NPT Ø12mm (0.47“)
HA011104: ½“ISO Ø6mm (0.24“)
HA011105: ½“NPT Ø6mm (0.24“)





SONDAS de REFERENCIA | Accesorios para sensores de humedad

MODELO SUITABLE FOR DESCRIPTION ORDER CODE

reference probe
EE22 EE07 probes with defined measuring
values to check the digital/analogue
conversion of the EE22 basic unit
(with test report)
probe 1: 90% RH / 5°C (41°F)
probe 2: 10% RH / 45°C (113°F)
HA010403

replacement probe EE07
EE22 The calibration data are stored in the
probe. A fast replacement of the probe
without readjustment of the
evalutation electronics is guaranteed.
housing stainless steel: EE07-MFT9
housing PC / membrane filter: EE07-PFT1
housing PC / metal grid filter: EE07-PFT6
for coating of sensors add HC01





COVERTIDORES de cable/INTERFAZ de cable | Accesorios sensores de humedad

MODELO SUITABLE FOR DESCRIPTION ORDER CODE

RS232 to RS485
MEE31, EE33 with RS485 interface - converter fromRS232 to RS485
- supports AutoPro, i.e. automatic
adjustement of the Baudrate from
300 bps bis 115200 bps
- enables to control 256 data acquisition
modules in a RS-485 network
- solation 3000 Vrms
HA010603

RS232 to USB
general - high speed converter from RS232
to USB
- certified: Microsoft WHQL approved
HA020110

E2 to RS232 for EE07
EE07 converter for E2-interface to RS232,
incl. software for test and data
cable length: 2m (6.6ft)
HA011001

E2 to RS232 for EE03
EE03 converter for E2.interface to RS232,
incl. software for test and data
recording
cable length: 2m (6.6ft)
HA011002

E2 to RS232 for EE08
EE08 converter for E2-interface to RS232,
incl. software für configuration, adjustement
or test
cable length: 2m (6.6ft)
HA011005

RS232 Interface Cable for
Screw Terminals
EE31, EE30Ex, EE33,
EE35, EE36
RS232 interface cable for connection
to screw terminals on the board
cable length: 2m (6.6ft)
HA010301

RS232 Interface Cable
with Pin Connector
EE31, EE30Ex, EE33,
EE35, EE36, EE371, EE381
RS232 interface cable to connect
directly on the board
cable length: 2m (6.6ft)
HA010304

RS232 Interface Cable
with External Plug
EE31, EE33, EE35, EE36 RS232 interface cable to plug into the
external socket on the housing C06
cable length: 2m (6.6ft)
HA010311





Clavijas, Enchufes y Cables de Conexión | Accesorios para sensores de humedad

MODELO SUITABLE FOR DESCRIPTION ORDER CODE

M12x1 Flange Coupling
for EE07
EE07 L = 50mm (2“) HA010705

M12x1 Flange Coupling
for EE08
EE08 type D flange coupling for housing assembly,
L = 200mm (8“)
HA010703

M12x1 Flange Receptacle Configurable
for EE08
EE08 type D 8 pol. flange resptale configurable,
IP67 (NEMA 4)
HA010704

Connecting Cable EE22/EE07
EE07, EE22 connecting cable - sensing probe EE07
wtih EE22 transmitter
length 2m (6.6ft): HA010801
length 5m (16.4ft): HA010802
length 10m (32.8ft): HA010803

Connecting Cable EE07
EE07 connecting cable with flying leads
for sensing probe EE07
length 1m (3.3ft): HA010809
length 2m (6.6ft): HA010810
length 5m (16.4ft): HA010811
length 10m (32.8ft: HA010812

Connecting Cable EE08
EE08 type D connecting cable with flying leads
for sensing probe EE08 type D
length 1,5m (4.9ft): HA010322
length 3m (9.8ft): HA010323
legnth 5m (16.4ft): HA010324
length 10m (32.8ft): HA010325

Connecting Cable VELOPORT/
OMNIPORT 20
OMNIPORT 20 connecting cable
hand-held - probe
length 2m (6.6ft): HA010813
length 5m (16.4ft): HA010814
length 10m (32.8ft):HA010815

 

  <<< Volver | Listado Accesorios

 

Accesorios para el Sensor EE160